|
Handspring Treo 600 Unlock solution.
Below is a simple solution to allow you to unlock your handspring
treo 600 allowing you to use any simcard from any network.
Please follow the instructions carefully and ensure you have
taken all precautions to back up your device incase of failure, it has been
confirmed as an effective solution unfortunatly we cannot guarantee it's effectiveness
on all devices therefore we have included this pda unlocking solution free
of charge.
1. Download and install Card Export. NOTE: The Card Export shareware install
file is attached to this post.
2. Make sure you can see the Treo's SD card as a logical drive on the machine
the Treo is connected to.
3. Download the flash, patched. Zip, here.
Part two:
1. Unzip all the files and copy them to the /PALM/LAUNCHER folder on your
SD card.
2. Hard reset the Treo.
3. Navigate to the card using the standard application launcher and run FirmwareUpdater.prc.
4. Click OK, click the Update Now button (I may have forgotten one or two
OK clicks here so don't hesitate to correct me here).
5. Sit back and relax; it's going to take a good 10 minutes.
6. The phone will automatically hard reset at the end of the process.
That's all, really. Note that I think it does do the entire 2.09 firmware
upgrade, so all this should even work when you're on an older firmware version.
I recommend you do the regular upgrade first though.
Check out this forum before you do anything, they give good advise Treo
forum
The information is FREE advice we have sourced on unlocking forums,
therefore you follow these instructions entirely at your own risk we take
no responsibility for any damage you may cause.
|